Ukuphonononga Wireline Core Drill Bits

Exploration Wireline Core Drill Bits Featured Umfanekiso

Inkcazelo emfutshane:

Amasuntswana edayimani emiliselweyo ngawona masuntswana aluncedo kakhulu kushishino lokuhlola izimbiwa, njengoko anoluhlu olubanzi losetyenziso.Amabanga akhethwe ngocoselelo omgangatho ophezulu wedayimani yokwenziwa asasazwe kubunzulu boluhlu lwematrix yebit emiliselweyo.I-matrix layer ye-ZM iqulethe ukuhanjiswa okufanayo kwezi crystals ezifakwe kwi-bond yensimbi yomgubo.

Umyalezo I-imeyile

Iinkcukacha zeMveliso

Iithegi zeMveliso

1. ekhoyo kuzo zonke iisayizi eziqhelekileyo zokomba (A,B,N,P,H).

2. uyilo lweendlela zamanzi ezahlukeneyo.

3. ubomi bit obude kunye nokusebenza kakuhle.

Ukukhetha isuntswana elilungileyo lomsebenzi, hlola isantya kunye namandla e-drill yakho malunga nobukhulu kunye nobunzulu bemingxuma ekufuneka igrunjwe kwaye uhlole iimeko zomhlaba ezifana nodidi lwamatye / ukubunjwa kunye neemeko zomngxuma osezantsi.

Ubungakanani:

Amasuntswana e-TDS afumaneka kuzo zonke iisayizi zokomba eziqhelekileyo.Kwakhona, amasuntswana angengawo asemgangathweni anokuveliswa ngokweemfuno zabathengi.

Umphakamo wesithsaba:

I-TDS inikezela ngobunzulu be-crown impreg ye-9mm, i-12mm, kunye ne-16mm.

Iindlela zamanzi:

Iindlela zamanzi ezahlukeneyo ziyafumaneka kwisuntswana ledayimani elimiliselweyo.Iindlela zamanzi ezahlukeneyo zivumela ukugungxulwa ngcono kwiimeko ezahlukeneyo zomhlaba kunye neenkqubo zokomba.

Imatrix:

Iimatriki ze-TDS ezimiliselweyo zinokukhethwa yinjineli yethu ngokweemeko zomhlaba kwindawo yokusebenza yomthengi.

Imisonto:

imisonto esemgangathweni ye-Q kunye neentlobo zemisonto ezifunwa ngabaxhasi ziyafumaneka.

Imatrix encinci	K1	K3	K5	K7	K9	K11
Ubunzima beMatrix	HRC54	HRC42	HRC30	HRC18	HRC6	HRC0
Ukuqina kwamatye	Khetha i-K1 kwimeko yokuphakanyiswa okuphantsi kokusebenza kwe-K3	Soft Rock Medium Hard Rock Hard Rock				Khetha i-K11 ngaphandle kwemifanekiso ye-K9
Ubungakanani beenkozo zeLiwa		Uziinkozo ezinkulu
Ukuqhekeka kweLiwa		Ukwaphuka okuMandundu okuQhelekileyo kuQeda
Drill Rig Amandla		Amandla aphezulu aPhakathi Amandla aPhantsi Amandla aphantsi

Seq.	Ubukhulu	Into	OD(mm)	Ikhowudi
1	AWL	I-Reaming Shell	48	P
2	BWL BWL2	I-Reaming Shell	59.9	P, D
3	NWL	I-Reaming Shell	75.7	P, D
4	HWL	I-Reaming Shell	96.1	P, D
5	PWL	I-Reaming Shell	122.6	P, D
6	SWL	I-Reaming Shell	148.1	P, D